Place of Origin : China
Model Number : 2760
Material : Silicone Rubber
Silicone rubber coated fiberglass sleeving is manufactured with non-alkali fiberglass braided sleeving and coated it with silicone resin and then vulcanized it to form insulating sleeving. It possesses good qualities of dielectric, heat-resistance, excellent elasticity and cold-resistance. It can be used for wiring insulation and mechanical protection for electric machinery and electrical appliances.
Note: The breakdown voltage for sleeving which inner diameter is or below 1.5mm should not be lower than 75% of the specified voltage.
Length: The standard length of the sleeving is1000+20-10 mm (continuous length may be negotiated)
Property Requirements,
Bore Diameter(mm) |
Wall Thickness(mm) |
||
Nominal |
Tolerance |
Nominal |
Tolerance |
1;1.5 |
+0.20;-0.10 |
0.4 |
±0.10 |
2;2.5;3;3.5 |
+0.30;-0.10 |
0.5 |
±0.15 |
4;5;6 |
+0.40;-0.20 |
0.6 |
±0.20 |
7;8;9 |
+0.50;-0.30 |
0.7 |
±0.20 |
10;11;12 |
+0.80;-0.50 |
0.8 |
±0.20 |
14;16;18;20;23;25;27 |
+1.00 |
1.0 |
±0.30 |
Property Requirements
Property |
Requirements |
Elasticity |
The coating should not crack or appear detached; 1,after3 hours at 200±2 oC; 2,after2 hours at -40~ -60oC |
Flame resistance |
Not less than 45seconds/25mm |
Heat resistance |
The coating should not crack or appear detached after 72 hours at 200±5oC. |
Breakdown voltage |
At room temperature:≥4.0kv; After damp: ≥2.0kv. |
2760 Electrical Insulation Fiberglass Sleeving Coated with Silicone Rubber Images |